December 13, 2017, 05:26:59 AM

collapse

* 'Like' And 'Follow' Us!

* Le Pan Market

If you like LePanForum.com please consider making a small donation to help keep our site free.

Author Topic: LE PAN TC1020 ROOT  (Read 17223 times)

Rabid1

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 724
  • Popularity: 32
    • View Profile
LE PAN TC1020 ROOT
« on: July 18, 2014, 07:05:44 PM »
I was able to figure out where the crippled su binary was coming from. from there I was able to modify Motochopper with a new exploit, su binary and SuperSU. Tested root by mounting /system in ADB and Root Checker. Copied files back and forth and pushed Root Explorer as a system app through ADB. You will need a working ADB driver installed on your PC. I have included the AnyData drivers recommended by Le Pan.

If you need to install the USB driver connect the TC1020 to your PC and power on. Under device manager you will see the TC1020 under "Other devices". right click the TC1020 and choose Properties. Choose Driver-Update driver- Browse to the AnyData folder in the directory you unzipped click next and double click the AnyData Android ADB Interface and let it install. Each version of Windows is slightly different but this should get your there.

Download and Unzip Modified Motochopper

1> Go into Settings-About and keep tapping Build Number at the bottom of the screen until you get Congratulations for enabling Developer Mode.
2> Back out of About and go into Developer Options. On the top right corner enable the developer options by tapping on.
3> Under Debugging enable USB debugging.
4> Connect your tablet to your PC
5>Go into the Motochopper Folder and double click "run". Motochopper will prompt you to press any key a couple of times then reboot then tablet. TADA You are rooted.
« Last Edit: December 12, 2014, 12:08:11 PM by Rabid1 »

mat

  • Jr. Member
  • **
  • Posts: 77
  • Popularity: 2
    • View Profile
Re: LE PAN TC1020 ROOT
« Reply #1 on: July 18, 2014, 07:38:23 PM »
👍

sent by mirrorflash Morse code


JohnA2u

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1171
  • Popularity: 42
    • View Profile
Re: LE PAN TC1020 ROOT
« Reply #2 on: July 23, 2014, 07:12:54 AM »
Great news Rabid.   Do you need to download the anydata drivers from the Le Pan site?  Are thet the ones used to update the Le Pan ll to ICS?

Sent from my GT-N8013


mat

  • Jr. Member
  • **
  • Posts: 77
  • Popularity: 2
    • View Profile
Re: LE PAN TC1020 ROOT
« Reply #3 on: July 23, 2014, 02:02:10 PM »
Are the firmware images available, in case of brick?
No custom Roms that I can find. Proprietary drivers I guess. Is the tc1020 a rebrand?
Cwm and twrp don't seem to be compatible so a nandroid backup might need adb pull.

Sent from my Le Pan TC1020 using Tapatalk


Rabid1

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 724
  • Popularity: 32
    • View Profile
Re: LE PAN TC1020 ROOT
« Reply #4 on: July 23, 2014, 07:10:55 PM »
Root process doesn't do anything that should soft-brick a tablet. The drivers are not proprietary, Anydata are universal. Nandroid wouldn't do any good if the device was soft-bricked. TC1020 isn't a re-brand, if it was it would probably be easier to find a custom recovery or ROM.

mat

  • Jr. Member
  • **
  • Posts: 77
  • Popularity: 2
    • View Profile
Re: LE PAN TC1020 ROOT
« Reply #5 on: July 23, 2014, 08:14:11 PM »
Lol, thx. Too many questions. Noticed cyanogen with cwm was available for an older le pan. Just need to wait for the modders to catch up maybe.

Sent from my Le Pan TC1020 using Tapatalk


ptjims

  • Newbie
  • *
  • Posts: 9
  • Popularity: 1
    • View Profile
Re: LE PAN TC1020 ROOT
« Reply #6 on: August 06, 2014, 04:39:38 PM »
Has anyone tried this? Does it work for you? I tried and can't get past "Daemon started successfully" .
I tried to use Anydata usb driver but my computer said I already had an up to date driver so I proceeded to turn on developer mode and usb debugging. Double click run bat and it just hangs.
Anyone have any ideas?
Thanks in advance
ptjims

Rabid1

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 724
  • Popularity: 32
    • View Profile
Re: LE PAN TC1020 ROOT
« Reply #7 on: August 06, 2014, 05:43:50 PM »
Has anyone tried this? Does it work for you? I tried and can't get past "Daemon started successfully" .
I tried to use Anydata usb driver but my computer said I already had an up to date driver so I proceeded to turn on developer mode and usb debugging. Double click run bat and it just hangs.
Anyone have any ideas?
Thanks in advance
ptjims

Try turning off any security software on your PC, or try running the runme as an administrator.
 

ptjims

  • Newbie
  • *
  • Posts: 9
  • Popularity: 1
    • View Profile
Re: LE PAN TC1020 ROOT
« Reply #8 on: August 06, 2014, 08:34:58 PM »
Thanks for the tip. I tried both but no luck. I think my trouble is that there is an error showing up in  device manager. The tablet shows up in "portable devices" as ok but in "other devices" it shows no drivers installed. I tried to run "adb.exe" this did not help.
I sure wish I knew what I am doing.

Rabid1

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 724
  • Popularity: 32
    • View Profile
Re: LE PAN TC1020 ROOT
« Reply #9 on: August 06, 2014, 09:15:10 PM »
Thanks for the tip. I tried both but no luck. I think my trouble is that there is an error showing up in  device manager. The tablet shows up in "portable devices" as ok but in "other devices" it shows no drivers installed. I tried to run "adb.exe" this did not help.
I sure wish I knew what I am doing.

If the computer gives you a warning about he driver you tell it to install anyway. But if you are unfamiliar with manually installing drivers the best way is to download and install PDAnet . Google it and the correct source is from June Fabrics.

mat

  • Jr. Member
  • **
  • Posts: 77
  • Popularity: 2
    • View Profile
Re: LE PAN TC1020 ROOT
« Reply #10 on: August 06, 2014, 10:27:03 PM »
Maybe the adb driver needs to be installed after turning on USB debugging? Between steps 4&5. The portable devices is probably mtp or ptp USB mode. Update the other devices driver as mentioned, should change to adb interface. Never mind, its not working for me either. Or koush universal adb driver. In the readme there's mention of installing certificates.

Sent from my Le Pan TC1020 using Tapatalk
« Last Edit: August 06, 2014, 11:21:32 PM by mat »

Rabid1

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 724
  • Popularity: 32
    • View Profile
Re: LE PAN TC1020 ROOT
« Reply #11 on: August 06, 2014, 11:35:07 PM »
Widows sees two devices when you connect a tablet. one will be an MTP or PTP device, the other will be the ADB device. Debugging does not need to be enabled for the PC to see the tablet and install drivers, that's kind of why the drivers need to be installed first for it to work.

Most often when people have problems it is either not knowing how to manually install drivers, do not have the proper rights/or security software, or the wrong drivers. We don't have the wrong drivers.

In general ADB drivers are universal. Some software engineers will edit the device ID to require the specific drivers they want you to use, but you can pull the id from the hardware info in device manager then edit the android_usb.ini on the PC to include the device.

mat

  • Jr. Member
  • **
  • Posts: 77
  • Popularity: 2
    • View Profile
Re: LE PAN TC1020 ROOT
« Reply #12 on: August 07, 2014, 06:04:22 AM »
Yeah, I'll start over later. Did manage to get the koush drivers to install in recovery mode only, waiting for adb sideload. It tried to load a driver in fastboot mode. There is no indication of fastboot on the tablet, just a haptic buzz and black screen. Didn't see a lepan driver on pdanet.

Sent from my Le Pan TC1020 using Tapatalk
« Last Edit: August 07, 2014, 06:06:24 AM by mat »

Rabid1

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 724
  • Popularity: 32
    • View Profile
Re: LE PAN TC1020 ROOT
« Reply #13 on: August 07, 2014, 09:47:44 AM »
Yeah, I'll start over later. Did manage to get the koush drivers to install in recovery mode only, waiting for adb sideload. It tried to load a driver in fastboot mode. There is no indication of fastboot on the tablet, just a haptic buzz and black screen. Didn't see a lepan driver on pdanet.

Sent from my Le Pan TC1020 using Tapatalk

Just do

Code: [Select]
adb reboot bootloader
then

Code: [Select]
fastboot devices
to make sure you are connected.

You have to have the fastboot.exe pathed or in the directory you are running adb from.

mat

  • Jr. Member
  • **
  • Posts: 77
  • Popularity: 2
    • View Profile
Re: LE PAN TC1020 ROOT
« Reply #14 on: August 07, 2014, 10:29:21 AM »
This needs to be foolproof so even I can do it!
The lepan mtp driver that is working is  microsoft - not anydata.
Managed to manually install the anydata  but it code 10s device cannot start. Thinking I may need to uninstall a bunch of drivers in safe mode from SDK and various devices.

The koush driver that loaded in recovery was Samsung galaxy nexus, don't know why it tried to download a fastboot driver and failed in fastboot mode. Don't need fastboot yet without images, right?

I thought the point was to get adb access after the tablet booted.

Sent from my Le Pan TC1020 using Tapatalk